•
Hey Joe, good frame and reflexions!
I think a WB tweak would help your shot!
I don't understand the background noise as this was taken at 200 ISO!
THE EXIF SAYS:
Exposure: Auto exposure, Aperture priority AE, 10 sec, f/9, ISO 200, Compensation: -4/3
A better practice to EV -4/3 in such case would be to "manual" everything with no EV
…this is where the noise may be coming from!
With so much difference in distance between the subjects and a long exposure, this was certainly a testing shot; but it has worked well.
I only have one complaint. When viewed at full screen size there is a very tiny red dot above the fourth light from the right. Maybe a star or something? Anyway, I would clone it out.
Thanks Kodiak! I did not notice/recognise the noise problem, and did not know the EV could add noise. I was just being lazy and using this function without realizing it could take away from my pic. Thanks for this advise. One other fact: I did not turn off the stabilizer during this exposure. Could this also add noise?
I think you got me wrong or, most probably, I poorly express myself!
I'm giving you the strategy I use in such conditions. And I know the good
practice of using EV since I use it most of the time but never in night shoots,
since all is on "manual", there is no need for that. … I know there is a
stabilizer switch but I never use it.
I am puzzled as to where the noise comes from!
Joe, regarding the noise have you increased the exposure/brightness in post processing?
If so this would increase it and be most noticeable in the dark sky.
•
…then I can only blame, as Nikon user, my lack of knowledge on Canon gear.
Sorry… ;-)
Joe, I take many long exposures and although I'm not familiar with your camera I would suggest that noise is a not a necessary accompaniment to exposures of that length.
To minimise noise use a low ISO, (base ISO for the camera) and expose the image so that you do not have to increase the exposure/brightness in post processing.
To achieve this, expose to push the histogram over to the right without clipping. So for this scene I would decide which aperture I want, set it, and then adjust speed to put the histogram in the required position.
I would work fully in Manual, centre the cameras meter, take a shot, check the histogram and make speed adjustments as necessary.
Grahame