Helpful Posts Helpful Posts:  0
Results 1 to 4 of 4

Thread: Considerating metal prints

  1. #1

    Join Date
    May 2011
    Location
    SE Michigan
    Posts
    4,511
    Real Name
    wm c boyer

    Considerating metal prints

    Does any photographic genre lend itself more to metal prints than would another genre...wildlife, landscape, B&W/color, portrait, or...put another way, is there one genre that one should be avoided printing on metal?

  2. #2
    DanK's Avatar
    Join Date
    Dec 2011
    Location
    New England
    Posts
    8,880
    Real Name
    Dan

    Re: Considerating metal prints

    Chauncey,

    I have very limited experience. I recently bought two 16 x 20 metal prints from Bay Photo. Both are flower macros. We did this because we were putting them into an environment too damp for paper prints. Both came out very well.

    If you are interested, you might find it worth get samples of the various finishes because they are very different--more so even than papers. I bought the sample of four from Bay Photo. Their four are a 2 x 2 matrix: glossy vs. matte (or satin), by sheer vs. not. The two that are sheer (glossy and matte) have an image layer that is sufficiently translucent that you can see the texture of the aluminum slightly in some areas. The high gloss (which I bought) and the satin have a more opaque image layer.

    The high gloss, which I bought, looks like very glossy paper, with a lot of pop.

    I think I would prefer different finishes for different purposes, but it is all a matter of taste.

    Dan

  3. #3

    Join Date
    May 2011
    Location
    SE Michigan
    Posts
    4,511
    Real Name
    wm c boyer

    Re: Considerating metal prints

    I have very limited experience
    I appreciate your response Dan...was aware of the sample packets available from Bay Photo.

    Take the last seven images in my sharing site...http://1x.com/member/chauncey43 consisting of pastels/dark backgrounds/garish reflection/abstract are all larger images, 20"x20" minimum,
    would any of them not work well if printed on metal?

  4. #4
    DanK's Avatar
    Join Date
    Dec 2011
    Location
    New England
    Posts
    8,880
    Real Name
    Dan

    Re: Considerating metal prints

    I don't think I have the expertise to know. Why not pick one of these and use it for the sample pack? It does cost a bit, but it will give you clear information before taking the splurge on the full-size ones, which are not cheap.

    BTW, I bought them with rounded edges and with the float, so they are held out from the wall. Looks very nice. The float won't work well with a standard picture hanger. I put in a small screw and anchor and left the screw about 1/8" from fully screwed in. that worked well.

    Quote Originally Posted by chauncey View Post
    I appreciate your response Dan...was aware of the sample packets available from Bay Photo.

    Take the last seven images in my sharing site...http://1x.com/member/chauncey43 consisting of pastels/dark backgrounds/garish reflection/abstract are all larger images, 20"x20" minimum,
    would any of them not work well if printed on metal?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •