Results 1 to 7 of 7

Thread: Wireless Shutter Canon T3 Compatibility

  1. #1
    bisso7's Avatar
    Join Date
    Jun 2012
    Location
    Bellefontaine, OH, USA
    Posts
    56
    Real Name
    Jeff

    Wireless Shutter Canon T3 Compatibility

    Hi All,

    I own a basic, Canon Rebel T3 DSLR. I cannot seem to find a wireless shutter release compatible with this model. Can anyone tell me if there's a wireless shutter release out there that is compatible with the T3? I should have purchased the T3i, actually, I know.

    Thanks,

    Jeff

  2. #2
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,224
    Real Name
    Manfred Mueller

    Re: Wireless Shutter Canon T3 Compatibility

    Vello makes a whole line of wired and wireless releases.

    http://www.vellogear.com/listing?category=17772

  3. #3
    DanK's Avatar
    Join Date
    Dec 2011
    Location
    New England
    Posts
    8,891
    Real Name
    Dan

    Re: Wireless Shutter Canon T3 Compatibility

    All that matters is that you get the correct plug. Canon traditionally has used a different plug for many Rebels than for more expensive cameras. If you have the right plug, the model of camera shouldn't matter.

  4. #4

    Join Date
    Aug 2013
    Location
    cornwall
    Posts
    1,340
    Real Name
    Jeremy Rundle

    Re: Wireless Shutter Canon T3 Compatibility

    what is a rebel T3

  5. #5
    bisso7's Avatar
    Join Date
    Jun 2012
    Location
    Bellefontaine, OH, USA
    Posts
    56
    Real Name
    Jeff

    Re: Wireless Shutter Canon T3 Compatibility

    Quote Originally Posted by JR1 View Post
    what is a rebel T3
    http://www.usa.canon.com/cusa/suppor...is_ii_lens_kit

  6. #6
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,224
    Real Name
    Manfred Mueller

    Re: Wireless Shutter Canon T3 Compatibility

    Quote Originally Posted by JR1 View Post
    what is a rebel T3
    Canon EOS 1100D in Europe

  7. #7
    inkista's Avatar
    Join Date
    Nov 2009
    Location
    California
    Posts
    1,503
    Real Name
    Kathy

    Re: Wireless Shutter Canon T3 Compatibility

    Yeah, you're not gonna find an infrared shutter release since the body has no sensor for it, and you're going to have to go to radio shutter releases where a receiver unit plugs into the camera's cable release port. Basically, you just need to make sure the bit that plugs into your camera's cable release port has the right connector, since Canon uses two different ones: a small 2.5mm miniplug for the lower-end cameras, and a proprietary three-pin connector for the prosumer/pro models.

    My personal recommendation, actually, would be to look for low-cost flash radio triggers that can do double-duty as a shutter release (e.g., Yongnuo RF-603ii or Cactus V5/V6 triggers. That way, you not only get a remote shutter release, you get a way to play Strobist, too, for not much more cash.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •