Page 2 of 2 FirstFirst 12
Results 21 to 27 of 27

Thread: Practicing The Craft: Stone sculptor take 2 ~ a 43 frame stack

  1. #21
    JohnRostron's Avatar
    Join Date
    Nov 2014
    Location
    South Essex, UK
    Posts
    1,375
    Real Name
    John

    Re: Practicing The Craft: Stone sculptor take 2 ~ a 43 frame stack

    Quote Originally Posted by JBW View Post
    I like it.
    Thanks Brian. I thought I would try this outside at a scale comparable to yours, so I had a go at a Potentilla bush in my front garden. The focussing worked OK, but unfortunately the wind got up just sufficiently to prevent the foliage from stacking. I shall have to find a few rocks to try it out on.

    John

  2. #22
    ajohnw's Avatar
    Join Date
    Aug 2012
    Location
    S, B'ham UK
    Posts
    3,337
    Real Name
    John

    Re: Practicing The Craft: Stone sculptor take 2 ~ a 43 frame stack

    I'm inclined to agree with Manfred's comment on the rocks shot but think that photo people have a tendency to forget another aspect of why people might focus stack and that is resolution. The best example of that is probably insect shots taken with microscope objectives or even lenses with supplementary lenses fitted. It's somewhat dependent on the resolution the subject needs. This is a resolution test of a tamron f2.8 macro lens.

    Practicing The Craft: Stone sculptor take 2 ~ a 43 frame stack

    So if the detail in the subject warrants it shots should be taken at 5.6 or 8 and then stacked but as Manfred says given distance and size plus reduction of a full sized image to web size a single shot with a suitable aperture would probably have been ok. Another point as well - is it best to stack before or after size reduction? I think if as suggested Brian took 3 or 4 it would be best to reduce before stacking to get the best results from the stacking software. The acceptable depth of field assume certain aspects about final image sizes etc the image on the sensor doesn't know what size things will finish up at.

    John
    -

  3. #23
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,159
    Real Name
    Manfred Mueller

    Re: Practicing The Craft: Stone sculptor take 2 ~ a 43 frame stack

    John, while I agree that resolution is one reason that one would focus stack, this is also true for why people shoot a pano, rather than cropping a wide angle shot.

    On the other hand, that level of resolution can be important if one makes large prints for pixel peepers, but if one prepares images to be viewed on the internet / social media where the largest dimension is often around 2048 pixels, all that resolution does not really add value.

  4. #24
    Stagecoach's Avatar
    Join Date
    Jun 2012
    Location
    Suva, Fiji
    Posts
    7,076
    Real Name
    Grahame

    Re: Practicing The Craft: Stone sculptor take 2 ~ a 43 frame stack

    Quote Originally Posted by JohnRostron View Post
    Thought that I would show you what my cardboard cut-out gizmo looked like:
    Practicing The Craft: Stone sculptor take 2 ~ a 43 frame stack

    The near ring, with the pointer, is fixed and the far ring, with the gradations, rotates with the focus barrel. This is fixed fairly firmly by an elastic band! I note the position on the dial of the near and far points and then interpolate, using one, two or three ticks on the outer dial, as appropriate.

    John
    Very snazzy John.

  5. #25
    Wavelength's Avatar
    Join Date
    Aug 2012
    Location
    Kerala, India
    Posts
    13,862
    Real Name
    Nandakumar

    Re: Practicing The Craft: Stone sculptor take 2 ~ a 43 frame stack

    Well done Brian; John's self made accessory is really great !!!

  6. #26

    Join Date
    Oct 2013
    Location
    Philippines
    Posts
    12,181
    Real Name
    Brian

    Re: Practicing The Craft: Stone sculptor take 2 ~ a 43 frame stack

    Quote Originally Posted by Wavelength View Post
    Well done Brian; John's self made accessory is really great !!!
    agreed

  7. #27
    ajohnw's Avatar
    Join Date
    Aug 2012
    Location
    S, B'ham UK
    Posts
    3,337
    Real Name
    John

    Re: Practicing The Craft: Stone sculptor take 2 ~ a 43 frame stack

    Quote Originally Posted by Manfred M View Post
    John, while I agree that resolution is one reason that one would focus stack, this is also true for why people shoot a pano, rather than cropping a wide angle shot.

    On the other hand, that level of resolution can be important if one makes large prints for pixel peepers, but if one prepares images to be viewed on the internet / social media where the largest dimension is often around 2048 pixels, all that resolution does not really add value.
    I've been intending for find out if stacking for resolution does offer any advantage Manfred. I suspect it will within limits. Also the reduce or not reduce and post process before stacking aspect. The depth of field does depend on final image size and in real terms on the web 12 to 14 hundred pixels is the usual size limit. As I'm now using a 40" monitor I have a much better idea what the eye can usefully accommodate in one go from the usual viewing distances.

    On m4/3 thanks to physics/practicalities I can take shot up to 80lp/mm at the centre at f4 but oly have optimised for macro work so edge drops off to 60. At F16 it's more or less the same as Brian's in this respect but even across the frame.

    My interest in this area perked up recently due to a plant my wife bought. Also I believe that if I upgrade my E-M1 firmware it will advance the focus point automatically. Not sure what will happen if it's set at 1:1 though so might have to use a rail. Some "extremists" do - driven by a stepping motor. For the amount of use I would have price rules that out.

    John
    -

Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •