Page 2 of 2 FirstFirst 12
Results 21 to 29 of 29

Thread: Camera Malfunction

  1. #21

    Join Date
    May 2014
    Location
    amsterdam, netherlands
    Posts
    3,182
    Real Name
    George

    Re: Camera Malfunction

    Quote Originally Posted by Shadowman View Post
    Finally got my camera back, it was returned a week ago but I was traveling and didn't get a hold of it until this morning. Nikon did the standard firmware upgrade, replaced some rubber fittings and also:

    RPL MEMORY COMPRESSION
    ADJ EXPOSURE
    ADJ A-WHITE BALANCE
    ADJ AUTO FOCUS OPERATION
    CKD COMMUNICATIONS
    CLN CCD
    GENERAL CHECK & CLEAN

    Of the changes the CLN CCD was done supposedly to remedy the original complaint, I'll have to see what memory compression does if anything. I took the camera out for a quick spin and immediately dismayed because the auto focus didn't seem to be working, everything in the viewfinder seemed to remain blurry. I checked my autofocus settings, reattached the lens, and nothing was working, also starting questioning my vision for a moment and then had a flash thought to adjust the diopter and all is well...so far.
    I recognize that last one.

    They only replaced memory compression? What's that?

    George

  2. #22

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Camera Malfunction

    Quote Originally Posted by Shadowman View Post
    . . . also started questioning my vision for a moment and then had a flash thought to adjust the diopter and all is well...so far.
    Been there, done that, John ...

  3. #23
    Shadowman's Avatar
    Join Date
    Dec 2009
    Location
    WNY
    Posts
    36,716
    Real Name
    John

    Re: Camera Malfunction

    Quote Originally Posted by george013 View Post
    I recognize that last one.

    They only replaced memory compression? What's that?

    George
    George,

    I found this on memory compression, what it accomplishes I will have to research further.

    https://www.ifixit.com/Guide/Nikon+D...placement/2098

  4. #24
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,158
    Real Name
    Manfred Mueller

    Re: Camera Malfunction

    Something that digital photographers seem to forget is that back in the film days, when cameras were much simpler, they went back to the shop once every year or two for a cleaning.

    In the days where we would upgrade our camera bodies every three years, that is a step we forgot about. Now that the incentive to do so because the quality gains between two (and even three) generations of cameras is so incremental, we tend to hold on to them for longer periods and sending them back for a cleaning makes sense.

    Unfortunately, the day of the independent camera tech is long gone, so the process involves sending the camera to an authorized service centre at a much higher cost as these centres don't have any competition.

    With respect to the link you posted, that is just about 100% useless. Fine if you have a scrapped camera to salvage replacement parts from, but that also means you need to know why it needs replacing. The Nikon camera techs will run a diagnostic on your camera and replace components that do not pass the diagnostic. The name of the component may or may not be of any use trying to understand what was wrong with the camera.

  5. #25
    Shadowman's Avatar
    Join Date
    Dec 2009
    Location
    WNY
    Posts
    36,716
    Real Name
    John

    Re: Camera Malfunction

    Quote Originally Posted by Manfred M View Post
    Something that digital photographers seem to forget is that back in the film days, when cameras were much simpler, they went back to the shop once every year or two for a cleaning.

    In the days where we would upgrade our camera bodies every three years, that is a step we forgot about. Now that the incentive to do so because the quality gains between two (and even three) generations of cameras is so incremental, we tend to hold on to them for longer periods and sending them back for a cleaning makes sense.

    Unfortunately, the day of the independent camera tech is long gone, so the process involves sending the camera to an authorized service centre at a much higher cost as these centres don't have any competition.

    With respect to the link you posted, that is just about 100% useless. Fine if you have a scrapped camera to salvage replacement parts from, but that also means you need to know why it needs replacing. The Nikon camera techs will run a diagnostic on your camera and replace components that do not pass the diagnostic. The name of the component may or may not be of any use trying to understand what was wrong with the camera.
    Manfred,

    Only posted the link as I was trying to figure out what was done to the camera, I checked the Nikon website and there weren't any hits on what memory compression was. The firmware update didn't mean anything to me either as I'd already done so months prior and had checked for updates prior to sending the camera in.

  6. #26

    Join Date
    May 2014
    Location
    amsterdam, netherlands
    Posts
    3,182
    Real Name
    George

    Re: Camera Malfunction

    Quote Originally Posted by Shadowman View Post
    Manfred,

    Only posted the link as I was trying to figure out what was done to the camera, I checked the Nikon website and there weren't any hits on what memory compression was. The firmware update didn't mean anything to me either as I'd already done so months prior and had checked for updates prior to sending the camera in.
    I understood you. The link is also dealing with a D70.

    George

  7. #27
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,158
    Real Name
    Manfred Mueller

    Re: Camera Malfunction

    Quote Originally Posted by Shadowman View Post
    Manfred,

    Only posted the link as I was trying to figure out what was done to the camera, I checked the Nikon website and there weren't any hits on what memory compression was. The firmware update didn't mean anything to me either as I'd already done so months prior and had checked for updates prior to sending the camera in.
    I spoke to a Nikon tech when my camera was in for service and this is just their standard protocol. While you had updated you firmware, many people do not. Even if you have, something could have gone wrong so by reinstalling it they know they are working with "clean" firmware and can trust the diagnostics from the camera.

  8. #28
    zen's Avatar
    Join Date
    Oct 2012
    Location
    Clarence, NY
    Posts
    493
    Real Name
    Zen

    Re: Camera Malfunction

    Those darn diopters . . .

    Zen

  9. #29
    Shadowman's Avatar
    Join Date
    Dec 2009
    Location
    WNY
    Posts
    36,716
    Real Name
    John

    Re: Camera Malfunction

    Quote Originally Posted by zen View Post
    Those darn diopters . . .

    Zen

Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •