Results 1 to 9 of 9

Thread: Knife Edge

  1. #1
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,163
    Real Name
    Manfred Mueller

    Knife Edge

    I thought I would try to shoot a 25 cm / 10 in chef's knife on edge.

    Knife Edge


    When viewed in Lightbox, the thickness of the knife blade can just be made out. To get this shot, I suspended the knife from an arm with a bit of electrical tape that I selected and cloned out.
    Last edited by Manfred M; 22nd December 2018 at 12:45 AM. Reason: Updated image

  2. #2

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Knife Edge

    Interesting shot. In FastStone Viewer, the blade projects 5 px wide; what is the shadow artefact each side of the blade?

    Knife Edge

  3. #3
    Stagecoach's Avatar
    Join Date
    Jun 2012
    Location
    Suva, Fiji
    Posts
    7,076
    Real Name
    Grahame

    Re: Knife Edge

    Quote Originally Posted by xpatUSA View Post
    Interesting shot. In FastStone Viewer, the blade projects 5 px wide; what is the shadow artefact each side of the blade?
    I had made the visual assumption that we are looking at the 'sharp' edge of the blade and the shadow was the area between front and rear. Unless it's a very thin knife?

  4. #4
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,163
    Real Name
    Manfred Mueller

    Re: Knife Edge

    The "shadow" is the taper from the cutting edge to the spine of the knife. Thickness varies from about 4mm near the bolster to around 0.5mm toward the tip. The thin black line is the cutting edge, which is what I focused the camera on. This side view of the knife is:



    https://www.zwilling.com/us/zwilling...sz=24&start=52

  5. #5

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Knife Edge

    Quote Originally Posted by Manfred M View Post
    The "shadow" is the taper from the cutting edge to the spine of the knife. Thickness varies from about 4mm near the bolster to around 0.5mm toward the tip. The thin black line is the cutting edge, which is what I focused the camera on.
    Ah, now it is clear, Manfred - and you did say "When viewed in Lightbox, the thickness of the knife blade can just be made out." which I somehow missed. Who, moi?

  6. #6
    Shadowman's Avatar
    Join Date
    Dec 2009
    Location
    WNY
    Posts
    36,716
    Real Name
    John

    Re: Knife Edge

    Nice capture.

  7. #7

    Join Date
    Nov 2012
    Location
    Australia (East Coast)
    Posts
    4,524
    Real Name
    Greg

    Re: Knife Edge

    Well captured. I think this image would work better if you removed the handle. If it were mine I would crop down to about the middle of the silver part of the handle, enough to remove the bit of shadow on it. Then it would be pleasing minimalist shot.

  8. #8
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,163
    Real Name
    Manfred Mueller

    Re: Knife Edge

    Quote Originally Posted by FootLoose View Post
    Well captured. I think this image would work better if you removed the handle. If it were mine I would crop down to about the middle of the silver part of the handle, enough to remove the bit of shadow on it. Then it would be pleasing minimalist shot.
    Intriguing suggestion. It works. Perhaps a bit too simple?

    Knife Edge

  9. #9
    Otavio's Avatar
    Join Date
    Jul 2012
    Location
    Santos, Sao Paulo, Brazil
    Posts
    2,621
    Real Name
    Otávio Oliveira

    Re: Knife Edge

    Nice concept. I liked it!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •