Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 59

Thread: Street photos in BW

  1. #21
    teokf's Avatar
    Join Date
    Feb 2012
    Location
    Tawau
    Posts
    750
    Real Name
    Steven

    Re: Street photos in BW

    Quote Originally Posted by Manfred M View Post
    This is a fairly aggressive S-curve. Any place the cure's angle is greater than 45 degrees the contrast is increased.
    Correct me if I am wrong. This curve would contrast the whole instead of just the mid?

  2. #22

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Street photos in BW

    Quote Originally Posted by teokf View Post
    Street photos in BW Originally Posted by Manfred M Street photos in BW
    This is a fairly aggressive S-curve. Any place the [curve's] angle is greater than 45 degrees the contrast is increased.
    Correct me if I am wrong. This curve would contrast the whole instead of just the mid?
    The contrast is affected by the slope, a.k.a dy/dx, at any point along this curve.

    When dy/dx = 1, contrast is not affected. There are two such points along the curve. At the mid-tone, the S-curve has a slope greater than 1, therefore contrast there is increased. In the shadows and the highlights, the S-curve has a slope less than 1, therefore contrast there is reduced.

  3. #23
    DanK's Avatar
    Join Date
    Dec 2011
    Location
    New England
    Posts
    8,823
    Real Name
    Dan

    Re: Street photos in BW

    Quote Originally Posted by xpatUSA View Post
    The contrast is affected by the slope, a.k.a dy/dx, at any point along this curve.

    When dy/dx = 1, contrast is not affected. There are two such points along the curve. At the mid-tone, the S-curve has a slope greater than 1, therefore contrast there is increased. In the shadows and the highlights, the S-curve has a slope less than 1, therefore contrast there is reduced.
    Exactly right, of course, but not intuitively clear to many people, I expect.

    I have been meaning for years to put together a little explanation of this, complete with graphics, but I have never gotten around to it. So, I'll give it a shot here, minus the graphics. Steven, my apologies if you already understand this.

    To start at the beginning: the histogram just shows how many pixels (well, closer to what proportion of pixels, but that doesn't matter) are at each level of brightness, starting with pure black at the left and pure white at the right.

    Now, here's the part that is hard to visualize without graphics. You are going to create a new histogram with the curves tool. Imagine that this new histogram is perpendicular to the original, so the left-hand vertical axis of the original histogram is now also the x-axis of the new histogram, running from pure black at the bottom to pure white at the top. If you leave the curve as a straight line, that new histogram will be exactly like the old one, just rotated 90 degrees counterclockwise.

    Now, apply an S-curve like Manfred's. First, look at the left-hand side. The curve compresses the darks. That is, all of the pixels in the lower part of the curve are compressed into a smaller (darker) range. The same thing is happening at the top end: the pixels that are very bright are compressed into an even narrower, brighter range.

    With those pixels pushed into the extremes, the pixels in the compressed areas have a smaller range of luminosity. (As Ted pointed out, these are the ranges where the slope of the S-curve is <1.)

    Now, as my grandmother used to say in her sometimes fractured English, comes the beauty part. What fills the space created by shoving those pixels to the extremes? Everything else, which is to say, the mid-tones, which expand to cover a wider range of luminosity than they covered initially. That is, the contrast between the darkest of the midtones and the lightest of them is larger. Because we are particularly sensitive to contrast in the mid-tones, this gives the image an appearance of greater contrast.

    Global contrast is the same principle, but applied to the entire histogram: by moving the black and white points, one increases the tonality difference between the lightest and darkest parts of the image.

    One of the reasons why I particularly like using the curves tool is that it gives you tremendous flexibility. You can put the inflection points (the places where the slope changes from <1 to >1) anywhere you want, thus controlling which areas show increased contrast. (I often use the targeted adjustment tool simply to locate key parts of the image on the histogram before starting.) Moreover, you can use multiple control points, not just two of them, to create any type of curve you want.

  4. #24
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,158
    Real Name
    Manfred Mueller

    Re: Street photos in BW

    Let me try to demonstrate what Ted and Dan have written in words a bit more graphically.


    1. Here I have taken the image that you have posted and opened up the shadows, along the same lines as what Bill did.

    Street photos in BW



    2. Then I converted to B&W using a 29% Red, 60% Green and 11% Blue

    Street photos in BW




    3. Here is the image with the S-Curve I posted in #20. As Ted and Dan have pointed out, the mid-tone contrast is up but the contrast in the shadows and highlight areas is down, as per their explanations.

    Street photos in BW




    4. If I want to increase global contrast (notice the slope of the curve is > 45 degrees), I bring in the black point and white point. This also crushes some shadow detail and clips some hightlights

    Street photos in BW




    5. Time to go a bit crazy and really crush the shadows and clip the highlights, but the contrast is really high.

    [url=https://flic.kr/p/2iBE24v]Street photos in BW[/url

  5. #25

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Street photos in BW

    Some, if not many, digital cameras have a curve applied during the conversion from raw to RGB whether you like it or not- even though digital sensors are more or less linear, unlike film. Here's a curve for one of mine:

    Street photos in BW

    Can't say I like it but ho hum ...

    The input is illuminance EV from a backlit Stouffer wedge.

    https://www.dpreview.com/reviews/sigmadp2/11
    .
    Last edited by xpatUSA; 8th March 2020 at 03:38 PM. Reason: added reference

  6. #26
    teokf's Avatar
    Join Date
    Feb 2012
    Location
    Tawau
    Posts
    750
    Real Name
    Steven

    Re: Street photos in BW

    Everyone, thank you for all the lessons. Very much appreciated for the time taken to illustrate the point. Again, thank you!

  7. #27
    teokf's Avatar
    Join Date
    Feb 2012
    Location
    Tawau
    Posts
    750
    Real Name
    Steven

    Re: Street photos in BW

    Still on the dicussion. The photo below, would it still be too much of crushed shadows and blacks or a valid high contrast/low key BW?

    people-woman-smoke.jpg
    Attached Images Attached Images
    Last edited by teokf; 9th March 2020 at 01:16 AM.

  8. #28

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Street photos in BW

    Comments on the degree of acceptable darkness aside, the background does appear to be significantly posterized, according to RawTherapee's color picker. The dark area at camera left has a min of 0 and a max of 13 but the cursor can be moved quite a distance before the value changes. With a median value (mode) of 1, someone might say it's too dark into the bargain.

  9. #29
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,158
    Real Name
    Manfred Mueller

    Re: Street photos in BW

    There are two aspects to the answer here, Steven.

    The first part involves capture and here, if possible, one generally tries to ensure that the highlights and shadows are protected, so much as possible. Under some circumstances, this is not possible and in that case, one generally tries to protect the highlights more than shadows.

    The second aspect is when one creates the final image and here the opinions vary. I have a formal (college level) background in photography and every instructor that I did B&W work under, both in the traditional wet darkroom and in the digital one insisted that an image should have every tonal value from pure black to pure white.

    Not everyone agrees with this and I do understand their point, to some extent.

    When it comes to doing B&W prints, the situation is even more fluid as with modern inkjet printers, any value of more than 240 prints as pure black and any value that is less than 15 does not deposit any ink on the paper, leaving a "bald spot" that can be seen when viewing the print at an angle.

    In this image, I find that you are just a touch heavy on the blacks and a touch light on the whites.

  10. #30

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Street photos in BW

    Quote Originally Posted by Manfred M View Post
    When it comes to doing B&W prints, the situation is even more fluid as with modern inkjet printers, any value of more than 240 prints as pure black and any value that is less than 15 does not deposit any ink on the paper ...
    I guess because I don't print, Manfred, I don't understand that at all, sorry.

  11. #31
    Stagecoach's Avatar
    Join Date
    Jun 2012
    Location
    Suva, Fiji
    Posts
    7,076
    Real Name
    Grahame

    Re: Street photos in BW

    Quote Originally Posted by Manfred M View Post
    When it comes to doing B&W prints, the situation is even more fluid as with modern inkjet printers, any value of more than 240 prints as pure black and any value that is less than 15 does not deposit any ink on the paper, leaving a "bald spot" that can be seen when viewing the print at an angle.
    Disregarding the typo Manfred, at what point in your workflow would you 'set/adjust' for the 15/240 ?

  12. #32
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,158
    Real Name
    Manfred Mueller

    Re: Street photos in BW

    Quote Originally Posted by xpatUSA View Post
    I guess because I don't print, Manfred, I don't understand that at all, sorry.
    Printers work a lot differently from computer screens. With a screen the actual light output from each pixel is variable,and depending on whether or not we are using an 8-bit or 10 bit display, we have a lot of variations for every pixel.

    Printers are not nearly as talented. While they can produce a much wider gamut than a screen, the actual number of discrete colours that can be produced by mixing the different inks is quite limited; either ink is deposited or it is not. On some of the higher end photo printers we have an additional variable; dot size, but even there we are still limited by 0, 1 or 2 dots per colour per "pixel". In practice while dot size is technically variable, this only comes into play in lower resolution; in higher resolution a larger dot is emulated by printing two dots beside each other, effectively the same as a single larger dot, but with twice as many tones.

    I have seen the math, but have no idea where I read it, but essentially any value between 0 and 12 (this is often rounded up to 15) all have the same amount of ink deposited on the paper. On the opposite end of the scale, for very much the same reason, any value about around 242 (rounded down to 240) has no ink deposited.

    If I ever find the article again, I will post a link to it.

  13. #33
    DanK's Avatar
    Join Date
    Dec 2011
    Location
    New England
    Posts
    8,823
    Real Name
    Dan

    Re: Street photos in BW

    When it comes to doing B&W prints, the situation is even more fluid as with modern inkjet printers, any value of more than 240 prints as pure black and any value that is less than 15 does not deposit any ink on the paper, leaving a "bald spot" that can be seen when viewing the print at an angle.
    I take the point, but the values depend on the paper and printer my printer does a bit better than that on the Canson baryta paper I most often use for prints that matter to me. 251 is (barely) noticeably different from pure white, and 6 is very slightly brighter than pure black. It's very hard to see, but I can clearly see it by 8.

    The Outback Photo test print conveniently has these extreme values labeled.

    leaving a "bald spot" that can be seen when viewing the print at an angle.
    The higher-end Canon printers use a clear coating. In the case of coated papers, you can set the driver to use this on the entire frame, not just areas where colored inks have been laid down. (For some reason, this can't be done with matte papers.) This eliminates the bald spots.
    Last edited by DanK; 9th March 2020 at 01:35 PM.

  14. #34
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,158
    Real Name
    Manfred Mueller

    Re: Street photos in BW

    Dan - as with all information about technology, it ages quickly and the material I looked at was probably at least 5 - 10 years old. Printer technology and ink technology has evolved. When I compare test prints made on my Epson 3880 versus the P800, there is a small but noticeable difference in the tones I can detect at both ends of the scale.

    I find much the same as you when I look at images, I can see subtleties, especially on high quality luster papers with a high Dmax when looking at a print under "gallery" lighting conditions (i.e 200 lux).

    Epson printers do not use a gloss enhancer and while one can see the difference between the bald spot and the over-printed sections of the when looking at the print at the right angle, once it is behind glass, that issue disappears. Another common treatment is using a UV protective spray, which uses a similar mechanism to Canon's gloss enhancer. The "old" trick that was used was to set the whites to a value of around 12 or 15 and this would just "kiss" the paper with enough ink to kill the bald spots.

    The reason Canon does not use it on matte papers is that we don't want the shine. Matte protective sprays work on matte papers without impacting the surface finish too much.

  15. #35

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Street photos in BW

    For those interested in tonal gradation there is an image of a very finely graduated tablet here:

    https://www.appliedimage.com/wp-cont...2/SDTP2Web.png

    The good thing is that my image color-picker shows that the image values appear to be as intended, unlike some posted Stouffer images. That is to say that one can view on-screen, or print, darks with file-tone increments of 1/255! Same with lights which go all the way up to 255 but with some steps of greater than 1/255 towards the end.

    Curiously, my screen color-picker goes up in bigger steps in the darks and tops out at 240 - no doubt something to do with with my monitor settings. That's the last time I'll look at an image on my screen and believe that I'm viewing exactly what's in the image file data !!!
    Last edited by xpatUSA; 9th March 2020 at 03:34 PM. Reason: added screen-picker note

  16. #36
    DanK's Avatar
    Join Date
    Dec 2011
    Location
    New England
    Posts
    8,823
    Real Name
    Dan

    Re: Street photos in BW

    The reason Canon does not use it on matte papers is that we don't want the shine
    That makes sense.

    BTW, I looked into this today because I was curious: with matte papers, the driver reverts to "auto", not off, for the chroma optimizer. It turns out that on the Prograf 1000--which, unlike larger Prografs, isn't designed for users to clean the platen manually--the printer uses a small amount of chroma optimizer to clean the platen after every print. This probably also accounts for the fact that the maintenance cartridge very slowly fills even when I don't notice any cleaning cycles.

  17. #37
    William W's Avatar
    Join Date
    Jan 2009
    Location
    Sraylya
    Posts
    4,941
    Real Name
    William (call me Bill)

    Re: Street photos in BW

    Quote Originally Posted by teokf View Post
    Bill, I don't like the conversion. His face is just too 'flat' for my liking. Moreover, if I am to show the conversion to the man (if I can find him) he will be very upset with me for making him look like a Chinese. . .
    Thanks for replying.

    The face being "too flat" could be addressed using the procedure as I set it out - AND by Dodging LESS and then increasing (localized) the Mid Tone Contrast on the face. At the conversion stage using a different toned Contrast Filter (as already mentioned) will add more punch generally.

    "making him look like a Chinese", for me, does not describe a technical outcome, upon which advice can be given.

    I'd appreciate knowing if you're attempting the Post Production procedures as I outlined: I don't mind if you're not, just curious to know which way you're heading.

    Thanks,

    WW

  18. #38
    William W's Avatar
    Join Date
    Jan 2009
    Location
    Sraylya
    Posts
    4,941
    Real Name
    William (call me Bill)

    Re: Street photos in BW

    Quote Originally Posted by teokf View Post
    Still on the dicussion. The photo below, would it still be too much of crushed shadows and blacks or a valid high contrast/low key BW?

    people-woman-smoke.jpg
    I am of the learning and the teaching that, The Lighting, will primarily and typically universally denote/define Low Key Photography, as such this is not, a Low Key Image.

    It's not all that High Contrast, either.

    If you're after 'validity' for Low Key Photography, then my advice is to address that goal with Lighting, not Post Production.

    WW

  19. #39

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Street photos in BW

    Eyes will probably glaze over but one click with a Fiji/ImageJ filter did this:

    Street photos in BW

    Filter is Contrast Limited Adaptive Histogram Expansion (CLAHE).

  20. #40
    William W's Avatar
    Join Date
    Jan 2009
    Location
    Sraylya
    Posts
    4,941
    Real Name
    William (call me Bill)

    Re: Street photos in BW

    Quote Originally Posted by xpatUSA View Post
    . . . Filter is Contrast Limited Adaptive Histogram Expansion (CLAHE).
    Ta. Ignorant of this.

    More for me to research.

    Thanks again.

    Bill

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •