Results 1 to 19 of 19

Thread: Hood substitute

  1. #1

    Join Date
    Nov 2017
    Location
    Ottawa, Canada
    Posts
    383
    Real Name
    Catherine

    Hood substitute

    I bought an ND filter and step-up rings so that the filter could be used on all of my lenses. The problem is that I can’t use a step-up ring and the hood of the lens. There doesn’t seem to be any such thing as a universal hood but I am trying to find a make-shift solution that would act as a universal hood. I have tried the Flex shade but don’t find it satisfactory for this purpose.

    I could use my hat to block some of the light but I wonder if there is some way I could get the same blocking quality as my hoods provide - something that goes around the lens. So, I wondered whether anyone used something other than their hoods to block unwanted light.

    Thank you

  2. #2
    Moderator Manfred M's Avatar
    Join Date
    Mar 2012
    Location
    Ottawa, Canada
    Posts
    22,162
    Real Name
    Manfred Mueller

    Re: Hood substitute

    Catherine - lot of lenses come with hoods and not all hoods are particularly effective, especially wide angle lenses.

    A hood is really only required when the light source (usually the sun) reflects off the surface of the lens or filter. When I have a flare issue, usually shading the lens with my hand is all it takes.

  3. #3

    Join Date
    Apr 2018
    Location
    lancashire UK
    Posts
    338
    Real Name
    roy

    Re: Hood substitute

    You can get a screw in hood which would fit on your ND filter, not as good as the proper hood but possibly better than nothing

  4. #4

    Join Date
    Nov 2017
    Location
    Ottawa, Canada
    Posts
    383
    Real Name
    Catherine

    Re: Hood substitute

    Quote Originally Posted by Manfred M View Post
    A hood is really only required when the light source (usually the sun) reflects off the surface of the lens or filter. When I have a flare issue, usually shading the lens with my hand is all it takes.
    Thank you Manfred. For an obvious flare then my hat or hand or this flex lens shade will do the trick. I was thinking of the stray light that degrades images that do not amount to an obvious flare. Perhaps I am wrong but when I have taken photos with and without a hood in the place and at the same time - usually because I suddenly noticed that I didn’t have my hood on put it on to re-take the photo - I found that the ones taken with the hood were better. I should go back and check that out though.

  5. #5

    Join Date
    Nov 2017
    Location
    Ottawa, Canada
    Posts
    383
    Real Name
    Catherine

    Re: Hood substitute

    Quote Originally Posted by royent View Post
    You can get a screw in hood which would fit on your ND filter, not as good as the proper hood but possibly better than nothing
    Thank you Roy, I hadn’t heard of those!

  6. #6
    DanK's Avatar
    Join Date
    Dec 2011
    Location
    New England
    Posts
    8,836
    Real Name
    Dan

    Re: Hood substitute

    In daytime photography, there is usually only a single light source that can cause flare, so a hand or hat should work well.

    Manfred noted that hoods for wide angle lenses are often quite ineffective. This is even more true for wide angle zooms, and it is true of all zooms at the short end because the hood has to be short enough not to vignette at the short end.

  7. #7
    William W's Avatar
    Join Date
    Jan 2009
    Location
    Sraylya
    Posts
    4,944
    Real Name
    William (call me Bill)

    Re: Hood substitute

    Carry a big Black Umbrella in your camera bag - one of those extending types. Light-weight, best with a straight handle, not the hook handle. I can hold mine in my Right hand: or using a Straight Flash Bracket it can be connected to the camera's base. You'll need to make a screw connection in the handle of the umbrella.

    WW

  8. #8
    Moderator Donald's Avatar
    Join Date
    Feb 2009
    Location
    Glenfarg, Scotland
    Posts
    21,402
    Real Name
    Just add 'MacKenzie'

    Re: Hood substitute

    Quote Originally Posted by William W View Post
    Carry a big Black Umbrella in your camera bag -
    Yep, I'd agree that that's the answer. You get some funny looks from people who don't understand the trials and tribulations faced by the photographer, but is the answer to the problem.

  9. #9

    Re: Hood substitute

    About a year ago I bought a "Tulip Flower Hood" that consists of a screw in ring that attaches to the thread on the front of the lens or filter, and the solid plastic hood itself which clips onto the ring - and can then be rotated or removed and attached reversed very easily. Also bundled in was a collapsible rubber hood (that also attaches via a screw in thread) that states it can be used for a range of lenses from telephoto to wide-angle. I haven't used the collapsible hood much as it was the other hood I was after. The whole thing (including a lens cap and micro-fibre cleaning cloth) cost me £8.99 via Amazon UK. It was for a Nikkor lens / filter with a 52mm thread but I imagine other sizes are available.

  10. #10

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Hood substitute

    Quote Originally Posted by Paul Rutter View Post
    About a year ago I bought a "Tulip Flower Hood" that consists of a screw in ring that attaches to the thread on the front of the lens or filter, and the solid plastic hood itself which clips onto the ring - and can then be rotated or removed and attached reversed very easily.
    I have similar mounted on a Sigma fixed 30mm focal length APS-C compact:

    Hood substitute
    Last edited by xpatUSA; 23rd June 2020 at 02:21 PM.

  11. #11

    Join Date
    Nov 2017
    Location
    Ottawa, Canada
    Posts
    383
    Real Name
    Catherine

    Re: Hood substitute

    Quote Originally Posted by Paul Rutter View Post
    About a year ago I bought a "Tulip Flower Hood" that consists of a screw in ring that attaches to the thread on the front of the lens or filter, and the solid plastic hood itself which clips onto the ring - and can then be rotated or removed and attached reversed very easily. Also bundled in was a collapsible rubber hood (that also attaches via a screw in thread) that states it can be used for a range of lenses from telephoto to wide-angle. I haven't used the collapsible hood much as it was the other hood I was after. The whole thing (including a lens cap and micro-fibre cleaning cloth) cost me £8.99 via Amazon UK. It was for a Nikkor lens / filter with a 52mm thread but I imagine other sizes are available.
    Thanks Paul! I haven't found it yet on Amazon.ca but I will think of other keywords to try.

  12. #12

    Join Date
    Nov 2017
    Location
    Ottawa, Canada
    Posts
    383
    Real Name
    Catherine

    Re: Hood substitute

    Quote Originally Posted by xpatUSA View Post
    I have similar mounted on a Sigma fixed 30mm focal length APS-C compact:
    Thanks Ted! I guess some days that would do the trick and other days, when the sun isn't blocked by that hood, a hat or hand or a black umbrella would do what I need.

  13. #13
    DanK's Avatar
    Join Date
    Dec 2011
    Location
    New England
    Posts
    8,836
    Real Name
    Dan

    Re: Hood substitute

    Quote Originally Posted by CatherineA View Post
    Thanks Ted! I guess some days that would do the trick and other days, when the sun isn't blocked by that hood, a hat or hand or a black umbrella would do what I need.
    Simpler yet, simply buy a regular lens hood that is the appropriate size for the filter. Any camera store will have a variety, some hard plastic, and some collapsible. Just make sure that it is not too long or too narrow for whatever focal length you are using.

    BTW, there is a simple geometric reason for the flower shape of some lens hoods. The sensor is a rectangle. The largest angle of light that can reach the sensor is longest in the corners, shortest at the top and bottom, and in between on the sides.

  14. #14
    rpcrowe's Avatar
    Join Date
    Jul 2008
    Location
    Southern California, USA
    Posts
    17,402
    Real Name
    Richard

    Re: Hood substitute

    Catherine...

    This seems like a solution - better than holding an umbrella.

    https://www.amazon.com/Probrella-Por...ot_top?ie=UTF8

    It's no longer available on eBay or amazon.com but I sent you a PM...

  15. #15

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Hood substitute

    Quote Originally Posted by DanK View Post
    Simpler yet, simply buy a regular lens hood that is the appropriate size for the filter.
    I'm puzzled ... all my lens hoods except the one I pictured have bayonet fittings for the lens body - not it's filter.

    So what is a "regular lens hood"? If it is one that screws into a female thread, that has already been mentioned.
    Last edited by xpatUSA; 23rd June 2020 at 08:25 PM.

  16. #16
    DanK's Avatar
    Join Date
    Dec 2011
    Location
    New England
    Posts
    8,836
    Real Name
    Dan

    Re: Hood substitute

    Quote Originally Posted by xpatUSA View Post
    I'm puzzled ... all my lens hoods except the one I pictured have bayonet fittings for the lens body - not it's filter.

    So what is a "regular lens hood"? If it is one that screws into a female thread, that has already been mentioned.
    What I meant by a regular lens hood is a single piece, as opposed to the multi-part device Paul mentioned. I was responding to Catherine's comment that she hadn't been able to locate the thing Paul mentioned. I should have mentioned that I was referring to one that screws into the filter, hence "the appropriate size for the filter.:

  17. #17

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Hood substitute

    Quote Originally Posted by DanK View Post
    What I meant by a regular lens hood is a single piece, as opposed to the multi-part device Paul mentioned. I was responding to Catherine's comment that she hadn't been able to locate the thing Paul mentioned. I should have mentioned that I was referring to one that screws into the filter, hence "the appropriate size for the filter.:
    Ah, now it is clear. Just like the one I showed in post #10. Thanks.

  18. #18

    Re: Hood substitute

    Catherine,

    This may not help but here's a link to the UK site for the items I mentioned:

    https://www.amazon.co.uk/gp/product/B071XYJ4SW

    The solid hood clips onto the ring that in turn screws into the filter. It's firmly attached but readily removed. So if you don't want the hood, or you are storing the camera in a camera bag where the hood makes it too long, the hood can be clipped on reversed.

  19. #19

    Join Date
    Feb 2012
    Location
    Texas
    Posts
    6,956
    Real Name
    Ted

    Re: Hood substitute

    Quote Originally Posted by CatherineA View Post
    Thanks Ted! I guess some days that would do the trick and other days, when the sun isn't blocked by that hood, a hat or hand or a black umbrella would do what I need.
    And that locking ring allows the petals to be turned to an orientation appropriate to the direction of the source of the flare - thereby delaying the hat/hand/umbrella moment.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •